check out the music videos below
Re: Shelby wheel number stampings From: nnsquared To: corsa1948 Date: 11/06/2011 09:38AM
corsa1948 Wrote:
-------------------------------------------------------
> nnsquared Wrote:
> --------------------------------------------------
> -----
> > Here is what my wheels have:
> >
> > Each wheel has cast info on the inside rim 14 X
> > 6.5 MAX LOAD 1580 LBS CSI.
> > There are stamped numbers, before the casting
> > above, 1 23 80 1, then
> > repeated, upside down. T stamped on a spoke
> edge.
> > The others have the
> > stamping on the back edge of one of the spokes,
> > all 1 20 80 2. Instead of a
> > big T, they have a big A, 2 on the center of
> the
> > rim, between the beads, and
> > on back edge of a spoke, one on back of hub on
> the
> > bolt circle. All have 4.5
> > or 4.50 on the back of the hub.
>
>
> Thank you. I will save this info and next chance
> see what I can find based on your info. I didn't
> know these came in 14" . IECO's original catalog
> only had 13" like mine . I am not aware of what
> other vendors sold these at the time.
> Thanks again,
> Larry
More info from a post on shelbys.com. I am trying to locate this guy.
migulitoraton85
Registered User
Join Date: Jun 2008
Location: Nashville, Tn
Posts: 8
Images: 1
Rep Power: 0
Re: Anyone recognize these rims?
________________________________________
Yep. Carroll Shelby Wheels part number 013645-3. 13" x 6" "Mini-Europa" with a 4x4.5 bolt pattern. manufactured at the Gardena, Ca. plant from late 1979 thru 1986, when the wheel company was sold to a company called Exon. Not the gas, just another big conglomerate. I was the sale manager for many years, in case you were wondering.
best!
corsa1948 Wrote:
-------------------------------------------------------
> nnsquared Wrote:
> --------------------------------------------------
> -----
> > Here is what my wheels have:
> >
> > Each wheel has cast info on the inside rim 14 X
> > 6.5 MAX LOAD 1580 LBS CSI.
> > There are stamped numbers, before the casting
> > above, 1 23 80 1, then
> > repeated, upside down. T stamped on a spoke
> edge.
> > The others have the
> > stamping on the back edge of one of the spokes,
> > all 1 20 80 2. Instead of a
> > big T, they have a big A, 2 on the center of
> the
> > rim, between the beads, and
> > on back edge of a spoke, one on back of hub on
> the
> > bolt circle. All have 4.5
> > or 4.50 on the back of the hub.
>
>
> Thank you. I will save this info and next chance
> see what I can find based on your info. I didn't
> know these came in 14" . IECO's original catalog
> only had 13" like mine . I am not aware of what
> other vendors sold these at the time.
> Thanks again,
> Larry
More info from a post on shelbys.com. I am trying to locate this guy.
migulitoraton85
Registered User
Join Date: Jun 2008
Location: Nashville, Tn
Posts: 8
Images: 1
Rep Power: 0
Re: Anyone recognize these rims?
________________________________________
Yep. Carroll Shelby Wheels part number 013645-3. 13" x 6" "Mini-Europa" with a 4x4.5 bolt pattern. manufactured at the Gardena, Ca. plant from late 1979 thru 1986, when the wheel company was sold to a company called Exon. Not the gas, just another big conglomerate. I was the sale manager for many years, in case you were wondering.
best!